Frosty Snowman Globe

Remember these?


Look what I made with them! 


You won’t believe where I got the inspiration for this cute snowman.  

NOPE! Not Pinterest! 

I just blew your mind, didn’t I? 

I got the idea at Goodwill! 

YEP! Goodwill! 

I saw one there, looked at the price and didn’t want to give that much. (A whopping $3.95) 

Call me cheap! 

I really didn’t want it because it was clear and I wanted mine to be frosty. 

So, I headed over to the glass vase area and found what I needed. Got the vase for .99 cents and the jar for the head for .55 cents! Then I went up the road and got the rest of what I needed. 

Want to make your own? Here’s how!

Whatcha Need

  • Glass vase with a round-ish bottom
  • Small round jar/bowl for head. (Make sure it is proportional with the vase)
  • E-6000 glue
  • Elmer’s glue
  • Black felt fabric
  • Glitter Spray
  • Black, orange and pink paint (I used glass paint I had on hand)
  • Scissors
  • Pencil
  • Paper
  • Ribbon (for scarf) 

Putting It All Together

First, wash the vase and bowl.

Turn the vase upside-down and put some E-6000 around the edge. place the bowl on top and give a gentle push to stick them together. Let dry completely before moving on. I let mine dry over night. 

For all you visual crafters out there, You will be happy to know I have pictures for the rest of the steps. 

IMG_2173Put some painters tape around the rim of the bowl. Spray the snowman with glitter spray. I put 2 coats on. Let dry between coats.

IMG_2178 Put a small drop of paint on for eyes. 

IMG_2179Paint on the nose. 

IMG_2180 For the cheeks, I put a drop of paint on my finger then, 

IMG_2182 pressed lightly. 

IMG_2183 I used a cotton swab to add the mouth.

IMG_2185 And the buttons on the tummy.

IMG_2186 Now for the hat!

Make a pattern first. This way if it isn’t the right size you haven’t wasted any felt fabric. 

IMG_2226I found something round that was bigger than then the rim of the bowl. This will be the rim of the hat. Carefully turn the snowman on his head and trace around it. This circle will be used as the opening for the hat and the top. This will make more sense in a minute.

IMG_2228 Cut them out and fold into quarters.

IMG_2229 Lay the smaller circle on top of the bigger one and trace. The fold lines are your guide. I drew them so you could see them better. 

IMG_2230 Traced!

IMG_2232 Fold the bigger circle in half and cut to the circle. 

IMG_2233 Fold in half again and cut to the circle. Then cut those 4 triangles in half for a total of 8 little triangles. 

IMG_2234Now, slide that over the top of the bowl and see if you like the size. If too big, cut some of the edge off. If too small, find a bigger circle to trace an repeat the steps above. If it’s just right go on to the next steps. 

IMG_2187 Trace the big circle on the felt. I used chalk so I could see my line.

IMG_2190 Trace the smaller circle onto the felt. I also folded the felt in half and used the fold as a guide to find the center. 

Cut the 8 triangle just like you did for the pattern. 

IMG_2195 Slide the hat over the rim. 

IMG_2196Now, decide how tall you want the hat to be. I chose about 2 inches. Measure and mark a long strip. 

IMG_2197 Cut it out. 

IMG_2237 Put some glue on each triangle. 

IMG_2238 Wrap the strip around the hat and make sure to pinch each triangle to the strip.

IMG_2241 Don’t forget to put some glue down the edge of the strip and glue them to close the hat. 

IMG_2243 Put some glue around the top of the hat and 

IMG_2244carefully put the top on. I just realized I forgot to tell you to cut it out. You’re smart enough to figure that out! 

IMG_2246To make the scarf, wrap some ribbon around the neck of Frosty! 

I wanted my Frosty to glow, but a tea candle won’t work. Now way for it to get air in the tummy or it will catch the hat on fire. My solution…

IMG_2577 I put a battery tea light on top of the bottom of a miniature wine glass form my son’s collection. 

IMG_2578 He glows! 

So, what do you think of my Frosty? Let me know what ya think!

Until then,                                                                                                            Jayne

Joining the Party at

Funky Junk Interiors 


Posted in crafts | 2 Comments

Star Garland

Star Garland I was supposed to have this post for you yesterday, and I do apologize! Things got              C-R-A-Z-Y around here! I got nothing done! 

I take that back. I did, but you sure can’t tell it now! 

Is anyone else like that? Please tell me there is at least one other person like that! 

I still have much to do so, I will make this quick. 

How to Make a Star Garland

Whatcha Need

  • Some straight sticks. (Mine were sucker off the bottom of my Crape Myrtles, but any will do)
  • Hot glue and hot glue gun
  • Jute twine or string
  • Scissors

Putting It All Together

Using a very precise measuring instrument, cut your sticks into pieces. 

IMG_2451 My precise measuring instrument was a popsicle stick! Cut 5 sticks for each star.

Lay the star out and play around with the sticks to get them like they need to be. 

I played for a while with mine and forgot to take pictures. 

IMG_2452 Hot glue the first 2 sticks together. 

IMG_2454 Then add sticks number 3, 

IMG_2456 4 and 5. 

I have to tell you where I got the inspiration from. Donna at Funky Junk Interiors. You have got to see her Twig Garland

For extra holding power, I tied little pieces of Jute twine at each point. 

IMG_2493 I could have sworn I got a picture of the twine. In it I was showing you that the twine can be divided into 3 smaller strings. I did that because I felt the twine was too thick as is. I know I took that picture. I took it three times ’cause it wouldn’t focus! No idea what happened to it! 

Anyhoot! Moving on!

IMG_2495 This step came about after I had hung the garland. Up until this point, we hadn’t had a fire in the wood stove. Let’s just say that hot glue doesn’t hold up very well with the heat of a wood stove blowing on it. 

The glue melted and two of the stars fell apart. To fix that I took it down and twisted a small piece of wire where the twine went, then covered it with twine. I also put some twine in the middle of the star for extra support. This step isn’t necessary if you don’t have a wood stove.

Now that we have taken care of that, let’s finish this thing!

Make several stars using the steps above. 

Using my very precise measuring instrument again, I measured the distance between the stars and tied two stars together with twine. 

IMG_2497 Repeat this step until your garland is as long as you need. 


Hang up and enjoy! 

IMG_2471 Of course you can hang it somewhere else besides the mantel.

Hopefully, I can give you a Christmas tour of my home in the next day or two. 

Until then,                                                                                                         Jayne 

Joining the Party at:

Savvy Southern Style

Posted in DiY Projects for the Home | 2 Comments

Chalkboard Nativity

I love having a nativity on the mantel at Christmas. It just doesn’t feel right when I don’t do one. When we had the TV above the mantel, it was hard to do a nativity scene. But the TV is down and I am free to decorate!

Of Course! What I had in mind to do and how it really turned out were two totally different things. 

I had originally planned to do a glitter version of a nativity and tape it to the mirror above the mantel. My paper glitter characters did not turn out at all like I visioned them. 

Scrape that idea! 

Plan B: Chalkboard

If I can’t make a glitter nativity, I will do a chalkboard!

I grabbed the chalkboard from the foyer and got to work. 

I Did Something Different on My Mantle

I Did Something Different on My Mantle

Now, I will be the first to admit I can not draw! I so cheated this nativity. Here’s how!

Whatcha Need

  • Nativity pattern (I used this one) This blogger did do a glitter nativity and has all the characters all ready to be downloaded and printed
  • paper
  • pencil
  • scissors
  • chalkboard
  • chalk and something to erase with (because you will mess up)

Putting It All Together

First, print out or trace each character. I just put a piece of paper up to the computer screen and traced it. Saves ink! Sorry, no picture of this. 

 Now, cut out the characters and lay the manger one on your board first. You’ll be working from the center to the sides. I did not tape mine down because I was afraid it would pull the chalkboard paint off of the glass. (I made my chalkboard from a large picture frame)Chalkboard Nativity Holding the paper in place I carefully colored in around the edges first. Ya know, it’s really hard to hold the paper, color and take a picture!  

Chalkboard Nativity

When you do this, start with the chalk on the paper and bring it down onto the chalkboard. The paper won’t get wrinkled and you keep inside the lines. 

After you do all the edges, fill in the rest.

IMG_2459 Using your finger smooth it all out, carefully staying in the lines.

IMG_2461 Lift the paper up and see how it looks. 

IMG_2462 This manger had a cut out piece in the center. To get that on my board, I carefully cut it out from the paper and laid it on top of the board and traced around it. 

IMG_2463 Lift it off and erase the inside with a cotton swab. 

IMG_2465 It may take a couple of cotton swabs. 

Now, lay the other characters down where you want and repeat the process. 

Chalkboard NativityFill in the bottom by drawing lines to connect the characters and filling in with chalk and smoothing it all out. For the stable, I just free-handed it. I know I said I can’t draw, but I can handle simple straight lines. 

Of course, my father in-law saw it and made a comment about one stable post being taller than the other. He would notice that! I thought it made the stable look more authentic. lol

For the star, I traced a cookie cutter. The lettering is my own. But I will tell you how I did it.

IMG_2468First, I found some inspiration.  I found mine here. For the words “for, a, child, is” I chose to write them in cursive. Then I wrote over them again in cursive. Where there were gaps, I filled them in with chalk. Those are the thicker lines you see. 

That’s how I did it! Simple enough! 

If you have any question, please feel free to ask! 

Tomorrow, I will show you how I made the star garland. 

Until then,                                                                                                                                                     Jayne

Joining the party at:

Sew Many Ways   Stone Gable   Savvy Southern Style

Posted in DiY Projects for the Home | 4 Comments

I Did Something Different on My Mantle

For years, I have done the same thing to decorate my mantle for Christmas. I usually can’t even start most of my decorating until we get our tree. I use the branches we cut off the bottom around the house.

Well, this year I didn’t want to wait that long since the season is so short. So… I marched myself right out to the woods behind our house and got me some decorations. (Be sure you read that last sentence with a strong southern accent. That helps to make it sound grammatically correct.) You can read about that adventure here.

IMG_2411 I laid the lights down first.  Then I laid the pine branches over the lights. 

IMG_2474 Next, came the cedar branches. Those are the pokiest things. I itched for hours!

IMG_2472I picked up two grocery sacks of huge pine cones the last time we were at the lake. I used four of them right smack in the center.

I wanted some candles, so I placed two bottles with white candles on each side. I think I’m going to change them to red, to add some color.

IMG_2473 I cut the suckers off the bottom of a Crape Myrtle to make this star garland. 


The stockings were made years (really stretch out saying the word “years”) ago. 

I wanted to do a glitter Nativity on the mirror, but mine didn’t turn out that well. I opted for this instead. 

IMG_2468 I have a tradition of putting up a nativity scene on the mantle. It just feels right.  

Next week, I will show you how I made the star garland and how I did the chalkboard. 

IMG_2470 Here’s a look at the whole mantle. 

IMG_2469 From the side. 

IMG_2476All lit up! I love the shadows it casts!

IMG_2477 Oh look! You can see the two outside lights through the window!

Bright light just went on in my head! I just feel like it needs something to the sides of the chalkboard. I know what I’m gonna do! You (I’m pointing my finger at you) will just have to see next week. 

So much more to do! Gotta go so I can get it all done before we go get our tree tonight!  

Until next week,                                                                                                                                         Jayne

Coming soon a Christmas tour of the house and something of the heart!

Posted in decorating | 2 Comments

The Reason For the Season

I just love Christmas. I love everything about it. 

The lights.

The decorations.

The music.

The shopping.

 The wrapping of gifts.

The excitement of Christmas morning.

The mess after the gifts have been opened. 

I just love it all! 

It’s easy to get all caught up in the fun of Christmas and forget about the Reason for the season. 

I want to change that this year. I want to focus on Jesus more. And not just Baby Jesus in the manger, but God the Son. I want to do more than just say that. I want to do that. 

But how?

I’m lacking wisdom in this area.

“Now if any of you lacks wisdom, he should ask God, who gives to all generously…but let him ask in faith without doubting.” James 1:5-6

The Reason for the Season

First, I’m ask for wisdom to do this. How does God want me to focus more on Him? 

I have a sin that I really struggle with. You could call it my “thorn in my flesh.” To help me stay focused on Jesus, I have to die to these sin every single day. I have to depend on Him to not lead me into the temptation to even go there, and deliver me from the evil (desire). You may say you don’t have one of these. I say you should ask God if there is anything in your life He is not pleased with and wants you to repent from. 

I am learning to praise God for everything. And I mean every little thing, every big thing and every in between thing as well. You could call it a carry over from Thanksgiving. 

I want to listen to music that brings Him praise. There are so many beautiful Christmas carols that focus solely on Him. I want to just read the lyrics and let them soak into my heart. 

I want to reread the Christmas story in the Bible and ask for a fresh and new lesson from it. I may even try reading it in different translations. 

I am asking God to show me how I can help someone else this Christmas. And not just this Christmas, but beyond if needed. 

If I had small children, I would do the Wandering Wisemen. Same concept as Elf on the Shelf, but with a biblical theme. A friend of mine is doing this and each day the wisemen find a new name for Jesus. Then, they look at the scripture that goes with the name. You know what? I just may do this when the boys come home. You’re never to old for a little fun. 

I want to do a random act of kindness each day. Smile at someone, say hello to someone, open the door for someone, maybe even pay for someone’s meal. We here in the south are known for waving to people while we are driving. People we don’t even know we wave to. Give it a try. It isn’t a full hand wave. Just a lift of a finger or two off the steering wheel. It may blow their mind, but they will talk about it later. It will even make them smile. 

Of course, we will read the Christmas story before we open presents Christmas morning. That’s tradition at our house. I’m already in prayer that this will become even more meaningful for everyone this year.

So, that’s my list. Got anything you want to add to it? I’d love for everyone to share. 

Here’s a smile for you! :)

Merry Christmas!                                                                                                                                       Jayne


Posted in devotional | Leave a comment